Videos


Home-Made Saw - Sierra Casera



WARNING!
THIS TOOL MUST BE MANIPULATED BY PEOPLE THAT USUALLY USE ELECTRIC TOOLS. DO NOT PUT YOURSELF UNDER UNNECESARY RISKS. IF YOU DO NOT USE ANY TYPE OF TOOLS, DO NOT TRY TO MANIPULATE OR MAKE THIS ONE. THE DEMONSTRATION THAT IS SHOWN IN THIS VIDEO CAN RESULT RISKY, BUT IT WAS MADE THIS WAY IN ORDER TO SHOW HOW THIS TOOL WORKS IN DETAIL. I MUST INSIST, BE CAREFUL, THIS MACHINE IS DANGEROUS FOR ALL THOSE PEOPLE WHO DO NOT MANIPULATE ELECTRIC TOOLS.


ADVERTENCIA!
ESTA HERRAMIENTA DEBE SER MANIPULADA POR PERSONAS QUE HABITUALMENTE UTILIZAN HERRAMIENTAS ELÉCTRICAS. NO CORRA RIESGOS, SI USTED NO USA HERRAMIENTAS DE NINGÚN TIPO, NO INTENTE FABRICAR O MANIPULAR ESTA HERRAMIENTA. LA DEMOSTRACIÓN QUE SE REALIZA EN ESTE VIDEO PUEDE SER ALGO RIESGOSA PERO SE HIZO DE ESTA MANERA PARA QUE PUEDA SER OBSERVADA EN DETALLE EL FUNCIONAMIENTO DE LA MISMA. INSISTO, CUIDADO, MÁQUINA PELIGROSA PARA TODOS AQUELLOS QUE NO MANIPULAN HERRAMIENTAS ELÉCTRICAS

This simple saw is designed to solve the perennial problems of naval modelers when cutting the planks for a model.
It is built entirely of metal. As it can be seen in the photographs there have been used leftover plates and angles from other buildings. Marriages are made with an electric welding machine which can be replaced with little bending sheet metal parts wit and using some screws.
All parts are mobile and the cutting table can be raised and lowed.
The turning shaft is mounted with two bearings. Use a saw / drill to make clean cuts.
In this case an electric drill was attached in order to give speed and strength to the cut. You might also use a motor connected to the axis or using belt pulleys, but the drill is completely functional.
Using a circular saw blade, you can also cut plastic, fiber, aluminum, plywood and ply (thin). Sizes are not given since they depend on the parts to get the bearings and the type of drill to use.
In the video you can appreciate the benefits of this home-made tool.

The plans of this saw are found at: http://www.modelistasnavales.com.ar

Esta sencilla sierra esta pensada para resolver los problemas con que se enfrentan los modelistas navales a la hora de cortar las tracas para armar un modelo.La misma está construida totalmente en metal. Como se puede ver en las fotografías, se han utilizado láminas de chapas y ángulos sobrantes de otras construcciones. Las uniones se realizaron usando soldadora eléctrica, que puede ser reemplazada utilizando algunos tornillos de sujeción si, con un poco de ingenio, se doblan las piezas de chapa previamente.
Todas las partes son móviles pudiendo subir y bajar la mesa de corte.El eje se torneó y montó con dos rulemanes. Se recomienda usar una sierra/fresa para lograr cortes limpios.En este caso se acopló un taladro eléctrico que le da la velocidad y la fuerza necesarias para el corte. También se puede usar un motor acoplado al eje o bien usar poleas con correa, pero el taladro abrevia y soluciona.El uso de una sierra para metales permite también cortar plásticos, fibra, aluminio y chapas (finas). No doy medidas ya que las mismas dependerán de las partes que se consigan, los rulemanes y el tipo de taladro a utilizar.
En el video se pueden apreciar las bondades de esta herramienta casera.

Los planos de esta sierra pueden encontrarse en: http://www.modelistasnavales.com.ar

Rafael Zambrino

Rating Rating Rating Rating Rating 
Views: 730,687
Added: 4 years
Runtime: 1:12
Comments: 125

Tags for this video:  



Find more videos in the: "Entertainment"
Uploaded by: Rafael Zambrino
See more videos uploaded by Rafael Zambrino


Related Videos:

Tutorial como fabricar una Sierra de banco casera parte1
Rating Rating Rating Rating Rating 
Views: 464672
hola amigos nuevamente estoy aquí para enseñarles a fabricar un banco de cierra para madera de forma fácil y económica, en donde comenzaremos a...
Torno taladro. Artesano.
Rating Rating Rating Rating Rating 
Views: 480809
Visita mi BLOG: http://angelatedo-angelatedo.blogspot.com.es/ Hola a tod@s Llevo un tiempo queriendo hacer esta herramienta. Ya ha sido posible...
Homemade micro table saw

Views: 295982
Homemade micro table saw build using Sherline tools. More info at http://metaltronics.wordpress.com/2011/05/16/micro-table-saw/
BANCADA MULTIFUNÇÃO KERBUS
Rating Rating Rating Rating Rating 
Views: 268821
TRANSFORMA MAQUINAS ELÉTRICAS MANUAIS EM MAQUINAS DE BANCADA, COMO SERRA CIRCULAR, SERRA MÁRMORE, SERRA TICO TICO, TUPIA
Home-Made Saw - Sierra Casera (2)
Rating Rating Rating Rating Rating 
Views: 85289
WARNING! THIS TOOL MUST BE MANIPULATED BY PEOPLE THAT USUALLY USE ELECTRIC TOOLS. DO NOT PUT YOURSELF UNDER UNNECESARY RISKS. IF YOU DO NOT USE ANY...
LineMaster ЛайнМастер kwb
Rating Rating Rating Rating Rating 
Views: 230454
Примеры применения Лайнмастер kwb
Homemade Disc Sander
Rating Rating Rating Rating Rating
Views: 321444
Simple Disc Sander I made from some spare parts. Tools are pretty expensive and hard to find here in Brazil so i had a small motor i found and an...
Home-made tools - Hand-powered sander. Ponceuse fabrication maison. Bricolaje una lijadora de disco
Rating Rating Rating Rating Rating
Views: 1439405
Save cash - use trash. A hand-powered sander made from scrap. We're powering down on all household items, including tools. I use a mitre block but...
Gensetec Grupos Geradores Tutorial Tupia e Fresas Parte II SSS
Rating Rating Rating Rating Rating 
Views: 671029
Video ensina como utilizar a tupia e as Fresas do Marca SSS , dando acabamento em madeira , fabricando brindes e outros objetos de decoração.Visite...
#4284 4in Mini Table Saw $19
Rating Rating Rating Rating Rating
Views: 125554
4" Mighty-Mite Table Saw Includes Two Blades For quick and easy cutting operations. Perfect for picture frames, molding, and plastics. Maximum...
Build a Workbench - Build it with Bosch
Rating Rating Rating Rating Rating 
Views: 929957
Alan Holtham shows you how to build a classic woodworking bench using just a few power and hand tools. This is the first in the 'Build it with...
homemade pcb drill pres
Rating Rating Rating Rating Rating 
Views: 178498
this is a drill pres that i made for small aplications it is easy to built hope you like it.
Horizontal Mortising Machine
Rating Rating Rating Rating Rating 
Views: 1399733
Here's a video of my home made horizontal mortising machine. For more information, contact me through my website:...
homemade tools.wmv
Rating Rating Rating Rating Rating 
Views: 1137211
some useful homemade tools for the workshop
Homemade Mini Bandsaw
Rating Rating Rating Rating Rating
Views: 249846
This is a little project I made in my spare time over the summer while taking classes at Michigan Technological University. It was inspired by a...
Tutorial Soporte universal minitaladro para fabricar miniaturas (1)
Rating Rating Rating Rating Rating 
Views: 186597
http://www.MiniaturasArtesanas.com Primer tutorial sobre el uso del soporte universal para minitaladros tipo dremel, en esta serie de tutoriales...
Homebuilt Router Copier Lathe
Rating Rating Rating Rating Rating 
Views: 1538435
Improved version of this Duplicator: https://www.youtube.com/watch?v=gxGb-U3YoH8&list=PLfJW8HEFKHPkLisoIU9T8nbdu_LmS3toV Quick video showing my...
Torno taladro Prácticas, Torneado de bolas
Rating Rating Rating Rating Rating 
Views: 103486
Making dowels
Rating Rating Rating Rating Rating 
Views: 1355711
http://woodgears.ca/dowel/making.html The pencil sharpener method of making dowels. Produces surprisingly accurate dowels, though it helps to...
How to make a table saw
Rating Rating Rating Rating Rating 
Views: 482951
Visit http://www.diysurvivalskills.com. This video shows how I made a table saw from the scratch. Check out my site for other cool videos, models...
Drillpress to Machine
Rating Rating Rating Rating Rating
Views: 131735
Never try this EVER! Quick little way's to get the job done'
Utility Table Saw Cut Demo
Rating Rating Rating Rating Rating 
Views: 720806
My new utility table saw in action. Read about it at http://www.ibuildit.ca/Workshop%20Projects/utility-table-saw-1.html
Bancada multifuncional home made
Rating Rating Rating Rating Rating 
Views: 994915
Bancada com serra circular e plaina, totalmetne feita em casa
Homemade Heavy Duty Bar Clamp
Rating Rating Rating Rating Rating 
Views: 690218
Guitar building Jigs & Fixtures Homemade Heavy Duty Bar Clamp. Can be used in joining parts of a guitar body and all other sorts of woodworking....
Homemade Table Saw
Rating Rating Rating Rating Rating 
Views: 285800
My DIY table saw. I use my SKIL circular saw, made a table top from a piece of plywood, attach the saw using 5 screws, put a retainer (with i side...

Comments:

Author Stepan Tumasyan (2 months)
super

Author จักรพันธ์ งามวัง (17 days)
ระวังนิ้วนะ

Author jose Guerra (4 years)
WOW, that's good man, perfect idea ,

Author Lazrahh (2 years)
What's up with the damn safety patrol? Christ almighty. Pretty sure the
operator is a big boy, and well aware of the risks associated with ANY
power tool. Good job, neat little trick. Gives me a few ideas.

Author Jose Provoste (1 year)
!cuidado con los dedos amigo!

Author Rafael Zambrino (2 years)
@regorekrub Read the description of the video please. Thanks.

Author MrLeonard55 (3 years)
Good idea

Author dhrehmaschine (2 years)
@Lordcirdan una sierra siempre es peligrosa , pero esta muy buena la voy a
copiar se muy facil de fabricar

Author Marco Antonio (2 years)
@sahariel420 No mames guey do you know read

Author Yulick Rasec (2 years)
Hola amigo soy brasileño y me pregunto si es posible que me envíen el
proyecto en mi correo electrónico? Me gustó su idea de que quieren montar
uno de ellos para mí. Muchas gracias

Author gombarreto (2 years)
todo o santo dia regulariso pelo menos um coto de amputação de dedo na
emergência. .

Author crazyness413 (1 year)
Nice

Author Skik Banzai (2 years)
KAMIKAZE! )))) ha-ha-ha....... super )))))

Author Bill T (1 year)
!Esta una un pequeno cortador de su dedos! jajaja

Author Jordan van Waas (11 months)
this is cool

Author panhead1219 (3 years)
...or chop stick makers!

Author Eduardo Licona (2 years)
good idea ....but you need add some safety requeriments

Author Lukas (1 year)
One of the best saw finger cut

Author scalabration (2 years)
@TD41990 LOL You buy now.

Author Siskin's Bits and Bobs (2 years)
I like that you use a push stick on the last cut. Wood looks best without
blood all over it. Nice wee saw. Thanks.

Author checkmatjj (2 years)
Good "hashi" maker

Author Rafael Zambrino (2 years)
@amaderos Lean la descripción del video antes de comentar por favor.
Gracias.

Author Rafael Zambrino (1 year)
Tenga en cuenta también que no es necesario utilizar un taladro eléctrico,
puede usar un pequeño motor de descarte, como los de los lavarropas u otra
máquina en desuso (tenga en cuenta el sentido de giro). También tenga en
cuenta que el plano de la máquina se encuentra en la página de la
Asociación Amigos del Modelismo Naval en la sección "trucos de taller".
Saludos y cualquier otra duda me consulta.

Author valeroso2000 (2 years)
por estar manejando la madera como tu lo esta haciendo, casi pierdo dos
dedos, debes de tener mas cuidado y no me digas que ya tienes experiencia
haciendolo porque lo mismo decia yo.

Author MrLeonard55 (4 years)
Pretty COOL

Author GUION2000 (2 years)
te encargo el dedo!

Author Rafael Zambrino (2 years)
Estimado amigo: los planos de esta herramienta los puedes encontrar en la
página web de nuestra asociación de modelismo naval, que figura en la
información, debajo del video. No dudes en consultarme por PM. Saludos!
Obrigado!

Author chalkpusher76 (2 years)
an expensive way to cut your fingers

Author wiels william (4 years)
Super !!! Serait-il possible d'avoir un plan pour en faire une ? william

Author greenjack1959l (2 years)
getting your fingers a bit close to that blade for comfort, nice little set
up though, mind your fingers!

Author Sandy windy (1 year)
Smart idea but need some more safety.

Author elvisx21 (3 years)
me encanto muy bien GOOD.........

Author Rafael Zambrino (2 years)
@gombarreto Read the description of the video please. Thanks.

Author CaneMajor (2 years)
Nice job!

Author TD41990 (3 years)
thats how the chopstick business is produced

Author labrat7357 (1 year)
Great project and it seems to cut very well. One simple mod that would add
a lot to the safety of the saw is foot to prevent the stock lifting at the
back of the blade. It could be as simple as a post screwed to the perspex
guide with a perspex block extending 1" over the work and held with a grub
screw. My view is saw guards often detract from safety by making cuts more
difficult, but something that stops the stock lifting stops most kick back
and rarley hinders the cut is a worthwhile mod.

Author Rafael Zambrino (2 years)
Puede ver en la pagina web cuya dirección se encuentra en la descripción
del video y baje los planos de la sierra. Usted pueda imprimir dichos
planos. Tenga mucho cuidado al usarla y le adelanto que la misma se
construyó con sobrantes de chapas y planchuelas de hierro. La parte mas
importante es fabricar el eje que contenga los dos rulemanes y si Usted no
es capaz de hacerlo, pidale a algún tornero que le fabrique el protaeje. No
dude en consultarme le contestaré en forma privada.

Author Feliciano Paixão (1 year)
Ora aqui está o que sempre pensei ser possivel fazer de modo simples e
barato. muito boa idéia.

Author jcarlosalex2011 (2 years)
interesante...

Author MrBonners (2 years)
ok mommy

Author kght222 (2 years)
even before i read the description i thought this looked great for wooden
models, and for those complaining about safety, NO SHIT IT IS DANGEROUS, IF
A PERSON DIDN'T KNOW THAT THEY DESERVE TO BE WOUNDED!. anyway maybe you
have, but a small scale planner would be awesome. anyway cool tool, and
anyone who thinks it isn't obviously dangerous to use a tool like that, and
must be treated with care, is either an idiot, or thinks that everyone else
is an idiot.

Author XLAWS XLAWS (2 years)
are you making chopsticks?

Author Luciano Urciuolo (2 years)
I suppose many problems with fingers!!!

Author Roger Burke (2 years)
My fingers bled just watching this... That is an accident waiting to
happen...

Author MrNeoMagic (2 years)
Una pregunta, todavia tenes los dedos?

Author marga3555 (1 year)
muy linda maquinita. . . Lástima que trabajes de forma tan insegura. . Yo
me corté la segunda falange del dedo gordo por trabajar tan mal.. .no te
confíes, cuando menos lo esperas te para. .

Author 00WoW00 (2 years)
Did you make the saw from a kit or did you make it out of things you had
laying around your shop? It looks like a very nice saw.

Author P0tat0_craft (1 year)
Lol obviously there are safety features that could be implemented here, but
hey I've done the same only with a 9in diameter blade. I've also replaced a
grinding wheel on a grinder with a saw blade.... Not the safest thing I've
DONT but I still have all 10 fingers

Author Lordcirdan (2 years)
Y dale con lo de los dedos, a lo sumo te corta las uñas jaja. Por que no
miran las máquinas combinadas Delbre, acá hay videos, esas si que te sacan
más que un dedo y se venden comercialmente. En este video (lo pongo en dos
a ver si sale) youtube.com /watch?v=QtZl7f0lJ3E&feature=related se ve una
fábrica de pipas, en el minuto 4,36 se ve como trabajan, esa si es
peligrosa.

Author Amaderos river (2 years)
Bonita maquina para rebanarte un dedo

Embed Video:

URL 
Link 

Search Video

Top Videos

Top 100 >>>

Videos

Check PR